Model · Walk-through metal detector
The high-end gate in the range: a smart 33-zone walk-through detector whose zone layout switches between 6, 11, 18 and 33 detection zones on the same frame. One 7-inch touch screen runs the gate, LED pillar lamps show the alarm position on both sides, and the whole unit draws under 20 W from a standard AC outlet.

Switchable zone layouts, touch-screen operation, 20-watt duty.
The TS-WD33Plus is specified when the security level changes during the day. Run the wide 6-zone layout for a staff entrance in the morning, switch to 33 zones for the evening event, and back again — the zone count is a setting, not a hardware choice, so one gate covers roles that would otherwise need two different units.
The 7-inch touch screen carries the operating interface: sensitivity, zone layout, alarm counters and settings are all adjusted on the gate itself, and LED pillar lamps on both sides light up the zone where metal was detected so the secondary-check officer knows where to sweep with the handheld.
The frame stands 2200 mm high with an 820 × 550 mm footprint and weighs 67 kg, built in fire-retardant PVC panels in black or white. It draws under 20 W from AC 110–240 V and operates from -25°C to +45°C, which covers unheated entrances and outdoor gate lines.

Full data as supplied for procurement, site planning and customs documentation.
| Detection zones | 6 / 11 / 18 / 33, switchable on the same frame |
|---|---|
| Zone indication | LED pillar lamp on both sides, alarm position lit |
| Display and control | 7-inch TFT-LCD touch screen |
| Alarm | Sound and light alarm |
| Outer frame | 2200 (H) × 820 (W) × 550 (D) mm |
|---|---|
| Inner frame | 2000 (H) × 700 (W) × 550 (D) mm |
| Weight | 67 kg |
| Panel material | Fire-proof PVC synthetic material |
| Colour | Black or white; other colours on request |
| Power supply | AC 110–240 V, 50/60 Hz |
|---|---|
| Power consumption | < 20 W |
| Operating temperature | -25°C to +45°C |
| Contents | Mainframe case × 1, left and right detecting heads, power supply wire, screw set (8 suites), instruction book, warning sticker, LED pillar lamp (2 lines) |
|---|
Ordered with the gate or added later; all are stock items from the same catalogue.
Battery set supporting more than 8 hours of independent operation for gate and body-scanner models.
Four-wheel groups and universal steel casters so the gate can be repositioned for events.
Universal chute table, 100 × 80 × 23 cm, for bag inspection beside the gate.
The standard companion for the secondary-check position beside every gate.
The TS-WD6S / WD8S / WD12S / WD18S / WD24S models have a fixed zone count each. The WD33Plus carries all four layouts (6 / 11 / 18 / 33) in one frame and switches between them, which is why it is the choice where the security level changes by day, event or season.
Typical cases: a courthouse that tightens the lobby for high-profile sessions, a stadium that runs a wide layout for staff mornings and a dense layout on match days, and exhibition venues that change the policy per event.
It operates from -25°C to +45°C on AC 110–240 V at under 20 W, and backup batteries are available as an option for sites with unstable power.
Test reports, the operator manual and a technical file are supplied with the equipment, together with CE, FCC and RoHS certification.
Tell us the country of installation and the intended use, and we will send the full technical catalogue and pricing.
Contact: Brandon, Sales Manager
Email: deal@topsaful.com
Tel / WhatsApp: +86 156 1616 8054
We usually reply within one business day.