Home › Handheld metal detector › MD-3003B1

Model · Handheld metal detector

MD-3003B1 Handheld Metal Detector

The workhorse handheld of the range: a 409-gram, 9-volt detector with audio tone and red LED alarm, a silent vibration mode, and a one-touch low-sensitivity switch that ignores coins, keys and pins while still alarming on handguns and knives. The unit most checkpoints reach for first.

409 gNet weight
9 VStandard battery
22 kHzOperating frequency
MD-3003B1 handheld metal detector

Built for a full shift of sweeping

Light, unambiguous, and tuned in seconds.

The MD-3003B1 is a precision hand-held detector for body screening at entrances, parcel and letter inspection, and any checkpoint where concealed metal must be found reliably and quickly. The detection face sweeps at 10–30 mm over clothing or luggage, and the response is unambiguous: an audio tone with a bright red LED, or a silent vibration alert for quiet environments.

Sensitivity is tuned in seconds without any calibration equipment. Turn the adjuster until the tone appears, then back it off until it just disappears — the detector is now at optimum. The one-touch low-sensitivity switch is the feature operators use most: it suppresses small metal such as coins, keys and hatpins and responds only to larger objects, which is exactly what most checkpoints want.

Power is a single 9 V battery, standard or rechargeable. A green LED shows power status; a built-in charging socket accepts 9 V rechargeable batteries (4–6 hours, unit switched off during charging), and an earphone socket supports discreet screening. The 409 g weight and ergonomic handle are what keep the sweep accurate at the end of a long shift.

Technical specifications

Full data as supplied for procurement, site planning and customs documentation.

Detection performance
Detection sensitivityØ 2.5 mm ball
.38 calibre handgunDetected at up to 15 cm (6 in)
Pen knifeDetected at up to 10 cm (4 in)
Razor bladeDetected at up to 5 cm (2 in)
Low-sensitivity modeOne-touch switch: ignores coins, keys and pins; alarms on handguns and knives
Sensitivity adjustmentSingle adjuster, no calibration equipment required
Alerts
Standard alertAudio tone and bright red LED
Silent alertVibration mode via side button
Power indicationGreen LED; dim or off indicates low battery
Physical
Dimensions (L × W × H)41 × 8.5 × 4.5 cm
Net weight409 g
Sweep height10–30 mm over the surface, detection face held parallel
Power and environment
Power supply9 V standard or rechargeable battery (6F22 type)
Operating voltage7–9 V
Power consumption270 mW
Operating current< 50 mA
Operating frequency22 kHz
Operating temperature-5°C to +55°C
Rechargeable supportBuilt-in charging socket; 4–6 hours charge, unit off during charging

What the officer gets

The details that decide whether a handheld is still useful at hour six of a shift.

Dual-mode alertsAudio tone plus red LED for open environments; vibration for quiet or discreet screening.
One-touch low sensitivitySuppresses coins, keys and pins; responds to handguns and knives — the mode most checkpoints actually run.
Fast tuningSensitivity set in seconds with one adjuster; no calibration tools.
Battery status at a glanceGreen power LED; unusual tone or dim light means replace or recharge before use.
Rechargeable-readyBuilt-in charging socket for 9 V rechargeable batteries; earphone socket for discreet checks.
Ergonomic handleBalanced 409 g body for extended sweeping without fatigue.
Certifications: CE · FCC · RoHS. Test reports, operator manual and a technical file are supplied with the unit for procurement review and customs clearance. OEM and ODM configurations available. Specifications subject to change without notice.

Frequently asked questions

What detection ranges can we state in a tender?

Typical values, sensitivity depending on object size, shape and composition: a .38 calibre handgun at up to 15 cm, a pen knife at up to 10 cm and a razor blade at up to 5 cm. With optimum tuning the range extends for larger targets.

Standard or rechargeable battery?

Both. The unit runs on a single 9 V battery of either type and has a built-in charging socket for rechargeables. Battery and charger sets are available as accessories.

How does the low-sensitivity switch change day-to-day operation?

It filters out the small metal every crowd carries, so the operator only stops for objects that matter. The alarm rate drops to something the lane can actually resolve.

Is OEM branding available?

Yes. OEM branding and packaging are available on request, alongside colour and configuration options.

Request a quotation

Tell us the country of installation and the intended use, and we will send the full technical catalogue and pricing.

Contact: Brandon, Sales Manager

Email: deal@topsaful.com

Tel / WhatsApp: +86 156 1616 8054

We usually reply within one business day.

WhatsApp us